YASKAWA DX200 - Enter the Password

2 Security System
2.1 Protection Through Security Mode Settings
2-7
– Security mode can be selected from “OPERATION MODE”,
“EDITING MODE”, “MANAGEMENT MODE” or “SAFETY MODE”.
3. Select the security mode to change.
– If the selected security mode is lower than the current security level,
the password will be required.
4. Enter the password.
– The following user ID numbers are set as default.
Editing Mode: [0000000000000000]
Management Mode: [9999999999999999]
Safety Mode: [5555555555555555]
5. Press [ENTER].
– If the password is correct, the security mode will be changed.