YASKAWA DX200 - Changing a User ID

2 Security System
2.1 Protection Through Security Mode Settings
2-9
2.1.2 User ID
User ID is requested when Editing Mode, Management Mode or Safety
Mode is operated.
The user ID should be 4 or more and 16 or less characters with number(s)
and symbol(s) for the editing mode and the management mode. As for
the safety mode, it should be 9 or more and 16 or less characters with
number(s) and symbol(s).
(Significant numbers and symbols: “0 to 9”, “-”, “.”.)
2.1.2.1 Changing a User ID
In order to change the user ID, the DX200 must be in Editing Mode,
Management Mode or Safety Mode. Higher security modes can make
changes the user ID of to lower security modes.
1. Select {SETUP} under the main menu.
– The sub menu appears.
2. Select {USER ID}.
– The USER ID window appears.