7 System Diagnosis
7.4 System Monitoring Time Display
7-18
7.4.3 Clearing the System Monitoring Time Display
The moving time and operating time can be cleared and set back to 0 by
following procedure. These operations can be performed in the SYS
MONITORING TIME window, or in the individual windows.
1. Select the time to be cleared.
– The confirmation dialog box appears.
2. Select “YES.”
– The cumulative time value at the cursor line is reset to 0, and a new
time measurement begins.
CONTROL POWER TIME, SERVO POWER TIME, PLAY-
BACK TIME, MOVING TIME AND OPERATING TIME can
be initialized when the parameter corresponding with each
time is 1.
S2C415…CONTROL POWER TIME
S2C416…SERVO POWER TIME
S2C417…PLAYBACK TIME
S2C418…MOVING TIME
S2C419…OPERATING TIME
To Next Page
Loading...
