12 Program Upload Function
12.2 Program Upload Procedure
12-2
12.2 Program Upload Procedure
Upload the program as shown below.
12.2.1 Preparation of Compact Flash
Prepare the compact flash with sufficient capacity (100MByte or more) for
saving the system program and perform the following procedures.
1. Connect the compact flash to a PC.
2. Use Explorer, etc. to delete all the data in the compact flash.
3. Remove the compact flash from the PC and insert it to the compact
flash slot on the programming pendant.
12.2.1.1 Uploading
Upload the program as shown below.
1. Turn ON the DX200 while pressing down the [MAIN MENU].
– The maintenance mode starts.
2. Set the security mode to the management mode
3. Select {EX. MEMORY} under the main menu.
– The sub menu appears.
To Next Page
Loading...
