YASKAWA DX200 - Page 490

Alarm List Alarm Number (1000 to 1999)
Alarm List-283
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
70 Incorrect setting of the host
name which is used in the
Ethernet function.
Setting error (1)Check the following settings.
∙ Host name of network in maintenance mode
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
71 Incorrect setting of the IP
address of the DNS server
which is used in the Ethernet
function of the DNS.
Setting error (1)Check the following settings.
∙ DNS setting of network in maintenance mode
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
73 Incorrect setting of the DHCP
parameter which is used in the
Ethernet function of the DNS.
Setting error (1)Check the following settings.
∙ DNS setting of network in maintenance mode
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
74 Incorrect setting of the DHCP
parameter which is used in the
Ethernet function of the DNS.
Setting error (1)Check the following settings.
∙ DNS setting of network in maintenance mode
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
75 Incorrect setting of the domain
which is used in the Ethernet
function.
Setting error (1)Check the following settings.
∙ Domain name of network in maintenance mode
Alarm
Number
Alarm Name Sub
Code
Meaning Cause Remedy