YASKAWA DX200 - Page 543

Alarm List Alarm Number (1000 to 1999)
Alarm List-336
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
1402 WORK IN/NOT DATA
CNT. LMT. OVER
Work status error Check the work in/not shift data and actual the work status within the
shift area.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
1403 WORK IN/NOT SHIFT
DATA POS LMT.
Work status error Check the work in/not shift data and actual the work status within the
shift area.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
1404 WORK ID. DATA CNT.
LMT. OVER
Work status error Check the work in/not shift data and actual the work status within the
shift area.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
1405 WORK ID. SHIFT
DATA POS LMT.
Work status error Check the work in/not shift data and actual the work status within the
shift area.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
1406 START SHIFT DATA
CNT. LMT. OVER
Work status error Check the start shift data and actual the work status within the shift
area.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
1407 START SHIFT DATA
POS LMT.
Work status error Check the start shift data and actual the work status within the shift
area.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
Alarm
Number
Alarm Name Sub
Code
Meaning Cause Remedy