YASKAWA DX200 - Page 59

5 Replacing Parts
5.1 Replacing DX200 Parts
5-19
Fig. 5-12: Thermal Sheet Mounting Instruction
Fig. 5-13: Major Axes Control Circuit Board (SRDA-EAXA21A)
"Thermal sheet mounting instruction"
SRDA-SDA71A01A-E
SRDA-SDA21A01A-E
SRDA-SDA35A01A-E toSRDA-SDA03A01A-E to
Thermal sheet : 400-007-165-01Thermal sheet : 400-007-166-01
Dich of the IPM
Details of ditch part on IPM
Ditches
Amplifier : SRDA-SDA35A01A-E~SRDA-SDA71A01A-E
True up the edges of the IMP frame and its ditches that are at the bottom
of the amplifier, then affix the thermal sheet along the edge.
Amplifier : SRDA-SDA03A01A-E~SRDA-SDA21A01A-E
Affix the thermal sheet to the bottom of the amplifier along its ditches.
Affix the thermal sheet to the bottom of the amplifier along the ditches.
Edge of the
thermal sheet
Thermal sheet
Bottom of the amplifier
Thermal sheet
Bottom of the amplifier
Dich of the IPM
(CN509)
(CN511)
(CN513)
(CN515)
(CN521)
LED
(CN516)
(CN507)
(CN510)
(CN508)
(S1)
(CN519)
(CN501)
(CN502)
(CN503)
(CN504)
(CN505)
(CN506)
PWM amplifier 2 I/F
PWM amplifier 4 I/F
PWM amplifier 6 I/F
PWM amplifier 5 I/F
PWM amplifier 3 I/F
PWM amplifier 1 I/F
Control power supply input
DC control power supply
Analog monitor I/F
Converter I/F
Encoder signal
Rotary switch
Control communication
STO control signal I/F
Control communication
Brake control signal
Machine safety I/O I/F