5 Replacing Parts
5.1 Replacing DX200 Parts
5-26
5.1.5.4 Brake Circuit Board
The types of fuse on the brake circuit board (JANCD-YBK21-3E) is as
follows.
Fig. 5-19: Brake Circuit Board (JANCD-YBK21-3E)
If the fuse is blown, replace it with the same type of fuse (supplied or
spare parts).
Parts No. Fuse Name Specification
F1 Brake power supply fuse for
the external axis
02173.15P, 250V,3.15A,
Rapid cut fuse
(LITTEL)
If the fuse seems to be blown, be sure to investigate its
cause, or blown again after the replacement.
(F1: For the external axes)
Brake power supply fuse
3.15A/250V
To Next Page
Loading...
