YASKAWA DX200 - Page 831

Alarm List Alarm Number (4000 to 4999)
Alarm List-610
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
-111 ASW file size over. Software operation error
occurred
The connected NADEX spot welder isn't corresponded to.Save the
CMOS.BIN in maintenance mode, and then contact your Yaskawa
representative about occurrence status (operating procedure).
-117 System call error. Software operation error
occurred
(1)Reset the alarm, and then try again.
(2)If the alarm occurs again, save the CMOS.BIN in maintenance
mode, and then contact your Yaskawa representative about
occurrence status (operating procedure).
4240 TPS:ERROR Sub Code: Welding power
source number.
Error occurred in the
Fronius power source.
Confirm the following content.
Step1: Check what kind of the error code is expressed on the front
panel of Fronius power source.
Step2: Check according with the Fronius's manual.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
4241 MOTOWELD SYSTEM
RESET
1 Error from welder 1. Arc welding power source
error
When finish system reset, Shut down the welding power source.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
2 Error from welder 2. Arc welding power source
error
When finish system reset, Shut down the welding power source.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
3 Error from welder 3. Arc welding power source
error
When finish system reset, Shut down the welding power source.
other If the alarm occurs again, save the CMOS.BIN in maintenance mode,
and then contact your Yaskawa representative about occurrence
status (operating procedure).
Alarm
Number
Alarm Name
Sub
Code
Meaning Cause Remedy