YASKAWA DX200 - Page 910

Alarm List Alarm Number (4000 to 4999)
Alarm List-689
106 STKOVL
Sub code[106**] shows the
error code of Fronius power
source
106:main error code
**:sub error code
Arc welding power source
error
Update firmware, otherwise change the UST board.
Confirm the Fronius's manual.
107 STKUVL
Sub code[107**] shows the
error code of Fronius power
source
107:main error code
**:sub error code
Arc welding power source
error
Update firmware, otherwise change the UST board.
Confirm the Fronius's manual.
108 ErrDog
Sub code[108**] shows the
error code of Fronius power
source
108:main error code
**:sub error code
Arc welding power source
error
Update firmware, otherwise change the UST board.
Confirm the Fronius's manual.
109 ASSErt
Sub code[109**] shows the
error code of Fronius power
source
109:main error code
**:sub error code
Arc welding power source
error
Update firmware, otherwise change the UST board.
Confirm the Fronius's manual.
110 EDg 1
Sub code[110**] shows the
error code of Fronius power
source
110:main error code
**:sub error code
Arc welding power source
error
Update firmware, otherwise change the UST board.
Confirm the Fronius's manual.
4300 VERIFY ERROR
(SERVO
PARAMETER)
Setting error (1)Reset the alarm.
(2)If the alarm occurs again, check whether the setting is within the
allowable range.
Alarm
Number
Alarm Name
Sub
Code
Meaning Cause Remedy