Yealink SIP-T46G Administrator's Guide

Administrator’s Guide for SIP-T46G IP Phone
88
Call transfer enables the IP phones to transfer an existing call to another party. The IP
phones support call transfer using the REFER method specified in RFC 3515 and offer
three types of transfer:
 Blind Transfer -- Transfer a call directly to another party without consulting. Blind
transfer is implemented by a simple REFER method without Replaces in the Refer-To
header.
 Semi-attended Transfer -- Transfer a call after hearing the ringback tone.
Semi-attended transfer is implemented by a REFER method with Replaces in the
Refer-To header.
 Attended Transfer -- Transfer a call with prior consulting. Attended transfer is
implemented by a REFER method with Replaces in the Refer-To header.
Normally, call transfer is completed by pressing the transfer key. The blind transfer on
hook and attended transfer on hook features allow the IP phone to complete the
transfer through on-hook.
When a user performs the semi-attended transfer, the semi-attended transfer feature
determines whether to display the prompt ―1 New Missed Call(s)‖ on the destination
party’s phone LCD screen.
Procedure
Call transfer can be configured using the configuration files or locally.
Configuration File
<y000000000028>.cfg
Specify whether to complete the
transfer through on-hook.
Configure the semi-attended
transfer feature.
For more information, refer to Call
Transfer on page 279.
Local
Web User Interface
Specify whether to complete the
transfer through on-hook.
Configure the semi-attended
transfer feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
To configure call transfer via web user interface:
1. Click on Features->Transfer.
2. Select the desired values from the pull-down lists of Semi-Attended Transfer, Blind

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm