Configuring Advanced Features
145
Action URL allows IP phones to interact with web server applications by sending an
HTTP or HTTPS GET request. You can specify a URL that triggers a GET request when a
specified event occurs. Action URL can be only triggered by the pre-defined events
(e.g., log on). The valid URL formats are:
http://IP address of the server/help.xml?
and https://IP address of the server/help.xml?
The following table lists the pre-defined events for action URL.
When the IP phone completes startup.
When the IP phone successfully registers an account.
When the IP phone logs off the registered account.
When the IP phone fails to register an account.
When the IP phone is off hook.
When the IP phone is on hook.
When the IP phone receives an incoming call.
When the IP phone places a call.
When the IP phone establishes a call.
When the IP phone terminates a call.
When the IP phone enables the DND mode.
When the IP phone disables the DND mode.
When the IP phone enables the always forward.
When the IP phone disables the always forward.
When the IP phone enables the busy forward.
When the IP phone disables the busy forward.
When the IP phone enables the no answer forward.
When the IP phone disables the no answer forward
When the IP phone transfers a call.
When the IP phone blind transfers a call.
When the IP phone performs the attended transfer.
When the IP phone places a call on hold.
When the IP phone retrieves a hold call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
