EasyManuals Logo

Yealink SIP-T46G Administrator's Guide

Yealink SIP-T46G
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
Administrators Guide for SIP-T46G IP Phone
80
To configure the session timer via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select the desired value from the pull-down list of Enable Session Timer.
5. Enter the desired time interval in the Session Expires (Seconds) field.
6. Select the desired refresher from the pull-down list of Session Refresher.
7. Click Confirm to accept the change.
The call hold feature provides a service of putting an active call on hold. When a call is
placed on hold, the IP phone sends an INVITE request with a HOLD SDP to the server.
The IP phones support two call hold methods, one is RFC 3264, it is used to set the a
(media attribute) in the SDP to sendonly, recvonly or inactive, for example: a=sendonly.
The other is RFC 2543, it is used to set the c (connection addresses for the media
streams) in the SDP to zero, for example: c=0.0.0.0. The call hold tone feature allows the
IP phones to play a hold tone at regular intervals when there is a call on hold.

Table of Contents

Other manuals for Yealink SIP-T46G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46G and is the answer not in the manual?

Yealink SIP-T46G Specifications

General IconGeneral
BacklightYes
Power requirements100-240V, DC 5V
Touchscreen-
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.711, G.722, G.723, G.726, G.729A, G.729B
BluetoothNo
RJ-9 ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width244 mm
Height213 mm

Related product manuals