Yealink SIP-T46G Administrator's Guide

Administrator’s Guide for SIP-T46G IP Phone
112
Accept Intercom
Accept Intercom allows the IP phones to automatically answer an incoming intercom
call.
Intercom Mute
Intercom Mute allows the IP phones to mute the microphone for incoming intercom calls.
Warning Tone
Warning Tone allows the IP phones to play a warning tone before answering an
intercom call.
Intercom Barge
Intercom Barge allows the IP phones to automatically answer an incoming intercom call
while there is already an active call on the IP phone. The active call will be put on hold.
Procedure
Incoming intercom calls can be configured using the configuration files or locally.
Configuration File
<y000000000028>.cfg
Configure the incoming intercom
call feature.
For more information, refer to
Incoming Intercom calls on page
290.
Local
Web User Interface
Configure the incoming intercom
call feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-intercom&q=load
Phone User Interface
Configure the incoming intercom
call feature.
To configure intercom via web user interface:
1. Click on Features->Intercom.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm