Administrator’s Guide for SIP-T46G IP Phone
104
To configure the presentation of the caller identity via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select the desired value from the pull-down list of the CID Source.
5. Click Confirm to accept the change.
The connected line identification presentation (COLP) feature allows IP phones to
display the identity of the callee specified for outgoing calls. The IP phone can display
the Dialed Digits, or the identity in a SIP header (Remote-Party-ID or P-Asserted-Identity)
received, or the identity in the From header carried in the UPDATE message sent by the
callee as described in RFC 4916.
If the callee has existed in the directory, the local name assigned to the callee should be
preferentially displayed.
Procedure
COLP can be configured only using the configuration files.
Configure the presentation of
the callee identity.
For more information, refer to
Connected Line Identification
Presentation on page 286.