Yealink SIP-T46G Administrator's Guide

Configuring Basic Features
103
6. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after reboot.
7. Click OK to reboot the IP phone.
To configure the web server type via phone user interface:
1. Press Menu->Advanced (password: admin) ->Network->Webserver Type.
2. Press or , or the Switch soft key to select the desired value in the HTTP
Status field.
3. Enter the HTTP port in the HTTP Port field.
4. Press or , or the Switch soft key to select the desired icon in the HTTPS
Status field.
5. Enter the HTTP port in the HTTPS Port field.
6. Press the Save soft key to accept the change.
The IP phone reboots automatically to make the settings effective after a period of
time.
The calling line identification presentation (CLIP) feature allows the IP phones to display
the caller’s identity, derived from a SIP header contained in the INVITE message, when
receiving an incoming call. The IP phones support three types of SIP headers: From,
P-Asserted-Identity and Remote-Party-ID. Identity presentation is based on the identity in
the relevant SIP header.
If the caller has existed in the local directory, the local name assigned to the caller
should be preferentially displayed.
Procedure
CLIP can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the presentation of
the caller identity.
For more information, refer to
Calling Line Identification
Presentation on page 286.
Local
Web User Interface
Configure the presentation of
the caller identity.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm