Administrator’s Guide for SIP-T46G IP Phone
16
Specify a list of IP addresses for routers on the
client’s subnet.
Specify a list of time servers available to the
client.
Specify a list of domain name servers
available to the client.
Specify a list of MIT-LCS UDP servers
available to the client.
Specify the name of the client.
Specify the domain name that client should
use when resolving hostnames via DNS.
Specify the broadcast address in use on the
client's subnet.
Network Time
Protocol
Servers
Specify a list of the NTP servers available to
the client by IP address.
Vendor-Specific
Information
Identify the vendor-specific information.
Identify the vendor type.
Identify a TFTP server when the 'sname' field
in the DHCP header has been used for DHCP
options.
Identify a bootfile when the 'file' field in the
DHCP header has been used for DHCP
options.
Procedure
DHCP can be configured using the configuration files or locally.
Configure DHCP on the IP phone.
For more information, refer to
DHCP on page 232.
Configure DHCP on the IP phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load