Yealink SIP-T46G - Directed Call Pickup

Administrator’s Guide for SIP-T46G IP Phone
92
Directed Call Pickup on page
282.
<y000000000028>.cfg
Assign a directed call pickup
key.
For more information, refer to
Directed Call Pickup Key on
page 356.
Configure the directed call
pickup feature on a phone
basis.
For more information, refer to
Directed Call Pickup on page
281.
Local
Web User Interface
Assign a directed call pickup
key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&model=1&q=loa
d&linepage=1
Configure the directed call
pickup feature on a phone
basis.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-callpickup&q=lo
ad
Configure the directed call
pickup code on a per-account
basis.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0
Phone User Interface
Assign a directed call pickup
key.
To configure a directed call pickup key via web user interface:
1. Click on DSSKey->Line Key.
2. In the desired DSS key field, select Directed Pickup from the pull-down list of Type.
3. Enter the directed call pickup code followed by the specific extension in the Value