Configuring Basic Features
109
3. Select the desired value from the pull-down list of Suppress DTMF Display Delay.
4. Click Confirm to accept the change.
On some traditional servers, call transfer is implemented via DTMF. The IP phones
support to send the specified DTMF digits to the server for transferring a call to a third
party.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configure the transfer via DTMF
feature.
For more information, refer to
Transfer via DTMF on page 289.
Configure the transfer via DTMF
feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-general&q=loa
d
To configure the transfer via DTMF feature via web user interface:
1. Click on Features->General Information.
To Next Page
Loading...
