Yealink SIP-T46G Administrator's Guide

Resource Files
209
When configuring some features, you may need to upload resource files to the IP phone.
The resources files can be local contact directory, remote phonebook and so on. Ask the
Yealink field application engineer for the resource file templates. If the resource file is to
be used for all IP phones of the same model, the access URL of the resource file is best
specified in the <y000000000028>.cfg file. However, if you want to specify the desired
phone to use the resource file, the access URL of the resource file should be specified in
the <MAC>.cfg file.
This chapter provides the detailed information on how to customize the following
resource files and specify the access URL:
 Replace Rule Template
 Dial-now Template
 Softkey Layout Template
 Local Contact File
 Remote XML Phonebook
 Specifying the Access URL of Resource Files
You can create multiple replace rules using the replace rule template. After preparing
the replace rule template, you need to place the replace rule template to the root
directory of the provisioning server and specify the access URL in the configuration files.
When editing a replace rule template, remember the following:
 <DialRule> indicates the start of a template and </DialRule> indicates the end of
a template.
 Create replace rules between <DialRule> and </DialRule>.
 When specifying the desired line(s) to apply the replace rule, the valid values are 0
and line IDs. The digit 0 stands for all lines, multiple line IDs are separated by
comma.
 At most 20 replace rules can be added to the IP phone.
 The expression syntax in the replace rule template is the same as introduced in the
section Creating Dial Plan on page 23.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm