EasyManuals Logo

Yealink SIP-T46G Administrator's Guide

Yealink SIP-T46G
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #425 background imageLoading...
Page #425 background image
Administrators Guide for SIP-T46G IP Phone
412
This section provides the sample configuration file necessary to configure the IP phone.
Any line starts with a pound sign (#) is considered to be a comment, unless the # is
contained within double quotes. For Boolean fields, 0 = disabled, 1 = enabled.
This file contains sample configurations for the <y000000000028>.cfg or <MAC>.cfg file.
The parameters included here are examples only. Not all possible parameters are
shown in the sample configuration file. You can configure or comment the values as you
required. The settings in the <y000000000028>.cfg file will be overridden by settings
which also appear in the <MAC>.cfg file.
T46G Sample Configuration File
#!version:1.0.0.1
#Note: This file header cannot be edited or deleted.
#Network Settings
network.internet_port.type =
#Configure the WAN port type; 0-DHCP, 1-PPPoE, 2-Static IP Address.
#If the WAN port type is configured as DHCP, you do not need to set the
#following network parameters.
#If the WAN port type is configured as Static IP Address, configure the
#following parameters.
network.internet_port.ip =
network.internet_port.mask =
network.internet_port.gateway =
network.primary_dns=
network.secondary_dns =
#If the WAN port type is configured as PPPoE, configure the following
#parameters.
network.pppoe.user =
network.pppoe.password =
#Dial Plan Settings
dialplan.area_code.code =
dialplan.area_code.min_len =
dialplan.area_code.max_len =
dialplan.area_code.line_id =
dialplan.block_out.number.1 =
dialplan.block_out.line_id.1 =
dialplan.dialnow.rule.X =
dialplan.dialnow.line_id.X =

Table of Contents

Other manuals for Yealink SIP-T46G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46G and is the answer not in the manual?

Yealink SIP-T46G Specifications

General IconGeneral
BacklightYes
Power requirements100-240V, DC 5V
Touchscreen-
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.711, G.722, G.723, G.726, G.729A, G.729B
BluetoothNo
RJ-9 ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width244 mm
Height213 mm

Related product manuals