Configuring Basic Features
83
Forward International
The forward international feature allows users to forward an incoming call to an
international telephone number. This feature is disabled by default.
Procedure
Call forward can be configured using the configuration files or locally.
Configure the call forward
feature in custom mode.
For more information, refer to
Call Forward on page 269.
Configure the call forward
mode.
Configure the call forward
feature in phone mode.
Configure the forward
international feature.
For more information, refer to
Call Forward on page 269.
Configure the call forward
feature.
Navigate to:
http://<phoneIPAddress>/ser
vlet?p=features-forward&q=l
oad
Configure the forward
international feature.
Navigate to:
http://<phoneIPAddress>/
servlet?p=features-general&
q=load
Configure the call forward
feature.
To configure call forward via web user interface:
1. Click on Features->Forward & DND.
2. In the Forward block, mark the desired radio box in the Mode field.
a) If you select Phone:
1) Mark the desired radio box in the Always Forward/Busy Forward/No Answer
Forward field.