Administrator’s Guide for SIP-T46G IP Phone
38
To change the administrator password via phone user interface:
1. Press Menu->Advanced (password: admin) ->Set Password.
2. Enter the current administrator password in the Current Password field.
3. Enter the new administrator password in the New Password field and Confirm
Password field.
4. Press the Save soft key to accept the change.
Phone lock is used to lock the IP phones to prevent it from unauthorized use. Once the IP
phone is locked, a user needs to enter the password to unlock it. The IP phones offer
three types of phone lock: Menu Key, Function Keys and All Keys. The phone lock feature
cannot take effect immediately after the phone lock type is configured. One of the
following steps is also needed by the user:
- Long press the pound key when the IP phone is idle.
- Press the keypad lock key (if configured) when the IP phone is idle.
In addition to the above steps, you can configure the IP phones to automatically lock the
keypad after a time interval.
Procedure
Phone lock can be configured using the configuration files or locally.
Configure the type of phone
lock.
Change the unlock password.
Configure the IP phone to
automatically lock the keypad
after a time interval.
For more information, refer to
Phone Lock on page 243.
Assign a keypad lock key.
For more information, refer to
Keypad Lock Key on page 355.
Configure the type of phone
lock.
Change the unlock password.
Configure the IP phone to
automatically lock the keypad
after a time interval.
Navigate to:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
