Configuring Basic Features
37
Advanced menu options are restricted to an administrator. Users can configure them
only if they have administrator privileges. The administrator password can be only
changed by the administrator. The IP phones support ASCII characters 32-126(0x20-0x7E)
only in passwords. A valid password should be complex and contains at least 6
characters, where at least one character is numeric, and one character is alphabetic.
Procedure
Administrator password can be changed using the configuration files or locally.
Change the administrator
password of the IP phone.
For more information, refer to
Administrator Password on page
243.
Change the administrator
password.
Navigate to:
http://<phoneIPAddress>/servlet
?p=security&q=load
Change the administrator
password of the IP phone.
To change the administrator password via web user interface:
1. Click on Security.
2. Select admin from the pull-down list of User Type.
3. Enter the current administrator password in the Old Password field.
4. Enter the new administrator password in the New Password and Confirm Password
fields.
5. Click Confirm to accept the change.