Yealink SIP-T46G Administrator's Guide

Administrator’s Guide for SIP-T46G IP Phone
60
3. (If enabled) Enter the desired delay time (in seconds) in the Inter Digit Time (1~14s)
field.
4. Click Confirm to accept the change.
The call waiting feature allows the IP phones to receive a new call when there is already
an active call. The new call is presented to the user visually on the LCD screen. The call
waiting tone feature enables the IP phones to play a short tone when receiving a new
incoming call during a conversation. The tone is audible to remind the user of the new
incoming call. The call waiting tone feature works only if the call waiting feature is
enabled.
Procedure
Call waiting and call waiting tone can be configured using the configuration files or
locally.
Configuration File
<y000000000028>.cfg
Configure the call waiting
feature.
For more information, refer to Call
Waiting on page 255.
Local
Web User Interface
Configure the call waiting
feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Phone User Interface
Configure the call waiting
feature.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm