Configuring Basic Features
61
To configure call waiting via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Call Waiting.
3. (Optional.) Enter the call waiting on code in the Call Waiting On Code field.
4. (Optional.) Enter the call waiting off code in the Call Waiting Off Code field.
5. Click Confirm to accept the change.
To configure the call waiting tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Call Waiting Tone.
3. Click Confirm to accept the change.
To Next Page
Loading...
