Configuring Basic Features
63
The default times are 10.
5. Click Confirm to accept the change.
To configure auto redial via phone user interface:
1. Press Menu->Call Feature->Others->Auto Redial.
2. Press or , or the Switch soft key to select the desired value from the Auto
Redial field.
3. Enter the desired time in the Redial Interval field.
4. Enter the desired times in the Redial Times field.
5. Press the Save soft key to accept the change.
The auto answer feature allows the IP phones to automatically answer an incoming call.
The IP phones will not automatically answer the incoming call during a call even if auto
answer is enabled. Auto answer is configurable on a per-account basis.
Procedure
Auto answer can be configured using the configuration files or locally.
Configure the auto answer
feature.
For more information, refer to
Auto Answer on page 257.