To configure auto answer via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Basic.
4. Select the desired value from the pull-down list of Auto-Answer.
5. Click Confirm to accept the change.
To configure auto answer via phone user interface:
1. Press Menu->Call Feature->Auto Answer.
2. Select the desired line and then press the Enter soft key.
3. Press or , or the Switch soft key to select the desired value from the Auto
Answer field.
4. Press the Save soft key to accept the change.
The call completion feature allows users to monitor the busy party and establish a call
when the busy party becomes available to receive a call. There are several possible
factors which can prevent a call from connecting successfully.
Callee does not answer
Callee actively rejects the incoming call before answering
The IP phones support call completion using the SUBSCRIBE/NOTIFY method, which is
To Next Page
Loading...
