Administrator’s Guide for SIP-T46G IP Phone
148
2. Enter the action URLs in the corresponding fields.
3. Click Confirm to accept the change.
Opposite to action URL, action URI allows IP phones to interact with web server
application by receiving and handling an HTTP or HTTPS GET request. When receiving a
GET request, the IP phone will perform the specified action and respond with a 200 OK
message. A GET request may contain variable named as ―key‖ and variable value,
which are separated by ―=‖. The valid URI formats are:
http://phone IP address/servlet?key=variable value
and https://phone IP address/servlet?key=variable value
The following table lists the pre-defined variable values:
To Next Page
Loading...
