Configuring Advanced Features
149
Press the Conference soft key.
Press the Navigation keys.
Let the IP phone perform auto provisioning.
Note
For security reasons, the IP phones do not receive and handle the HTTP/HTTPS GET
request by default. You need to specify the trusted IP address for action URI. When the IP
phone receives a GET request from the specified IP address for the first time, the phone
LCD screen prompts the message ―Allow Remote Control?‖. You can specify one or more
trusted IP addresses on the IP phone. You can also configure the IP phone to receive and
handle the URI from any IP address.
Procedure
Specify the trusted IP address for Action URI using the configuration files or locally.
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
For more information, refer to
Action URI on page 311.
Specify the trusted IP
address(es) for sending the
Action URI to the IP phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-remotecontrl&q
=load
The variable value does not work with all events. For example, the variable value
―MUTE‖ is only applicable when the IP phone is during a call.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
