Yealink SIP-T46G Administrator's Guide

Configuring Basic Features
69
2. Select the desired line and then press Enter soft key.
3. Press or , or the Switch soft key to select the desired value from the
Anonymous Reject field.
4. (Optional.) Enter the anonymous call rejection on code in the On Code field.
5. (Optional.) Enter the anonymous call rejection off code in the Off Code field.
6. Press the Save soft key to accept the change.
The Do Not Disturb (DND) feature allows the IP phones to ignore incoming calls. The
DND feature is based on a phone or per-account depending on the DND mode. The
following describes the two DND modes:
 Phone (default): When the DND mode is ―Phone‖, it means the DND feature is
effective for the IP phones.
 Custom: When the DND mode is ―Custom‖, it means that you can configure the
DND feature for each account.
A user can activate or deactivate the DND feature using a DND soft key or DND key.
DND activated on the IP phones disables the local call forward settings. The DND
configurations on IP phones may be overridden by the server settings.
The DND on code or DND off code configured on the IP phones is used to activate or
deactivate the server-side DND feature. They may vary on different servers.
Return Message When DND
This feature defines the return code and the reason of the SIP response message for the
rejected incoming call when DND is enabled on the IP phones. The caller’s phone LCD
screen displays the received return code.
Procedure
DND can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the DND feature in the
custom mode.
For more information, refer to
Do Not Disturb on page 261.
<y000000000028>.cfg
Assign a DND key.
For more information, refer to DND
Key on page 355.
Configure the DND mode.
Configure the DND feature in the
phone mode.

Yealink SIP-T46G Specifications

General

Backlight	Yes
Power requirements	100-240V, DC 5V
Touchscreen	-
Display diagonal	4.3 \
Display resolution	480 x 272 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	6
Voice codecs	G.711, G.722, G.723, G.726, G.729A, G.729B
Bluetooth	No
RJ-9 ports quantity	2
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	185 mm
Width	244 mm
Height	213 mm