Administrator’s Guide for SIP-T46G IP Phone
62
To configure call waiting and call waiting tone via phone user interface:
1. Press Menu->Call Feature->Call Waiting.
2. Press or , or the Switch soft key to select the desired value from the Call
Waiting field.
3. Press or , or the Switch soft key to select the desired value from the Play
Tone field.
4. (Optional.) Enter the call waiting on code in the On Code field.
5. (Optional.) Enter the call waiting off code in the Off Code field.
6. Press the Save soft key to accept the change.
The auto redial feature allows the IP phones to redial a busy number after the first
attempt. Both the number of attempts and waiting time between redials are
configurable.
Procedure
Auto redial can be configured using the configuration files or locally.
Configure the auto redial feature.
For more information, refer to
Auto Redial on page 256.
Configure the auto redial feature.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
To configure auto redial via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Auto-Redial.
3. (If enabled) Enter the desired time interval (in seconds) in the Auto-Redial Interval
(1~300s) field.
The default time interval is 10s.
4. (If enabled) Enter the desired times in the Auto-Redial Times (1~300) field.