Yealink SIP-T46G - Page 160

Configuring Advanced Features
147
Variable Value
Description
call or establishes a call.
$local
The SIP URI of the caller when the IP phone places a
call.
The SIP URI of the callee when the IP phone receives
an incoming call.
$remote
The SIP URI of the callee when the IP phone places a
call.
The SIP URI of the caller when the IP phone receives
an incoming call.
$display_local
The display name of the caller when the IP phone
places a call.
The display name of the callee when the IP phone
receives an incoming call.
$display_remote
The display name of the callee when the IP phone
places a call.
The display name of the caller when the IP phone
receives an incoming call.
$call_id
The call-id of the active call.
Procedure
Action URL can be configured using the configuration files or locally.
Configuration File
<y000000000028>.cfg
Configure the action URL on the
IP phone.
For more information, refer to
Action URL on page 309.
Local
Web User Interface
Configure the action URL on the
IP phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-actionurl&q=loa
d
To configure action URL via web user interface:
1. Click on Features->Action URL.