Administrator’s Guide for SIP-T46G IP Phone
146
When the IP phone mutes a call.
When the IP phone unmutes a call.
When the IP phone misses a call.
When the IP address of the IP phone changes.
When the IP phone forwards an incoming call.
When the IP phone rejects an incoming call.
When the IP phone answers a new call.
When the IP phone completes to transfer a call.
When the IP phone fails to transfer a call.
When the state of the IP phone changes from idle to
busy.
When the state of phone changes from busy to idle.
An HTTP or HTTPS GET request may contain variable name and variable value, which
are separated by ―=‖. Each variable value starts with $ in the query part of the URL. The
valid URL formats are: http://IP address of server/help.xml?variable name=$variable
value and https://IP address of server/help.xml?variable name=$variable value.
Variable name can be customized by users, while the variable value is pre-defined. For
example, a URL
http://192.168.1.10/help.xml?mac=$mac
is specified for the event Mute,
$mac will be dynamically replaced with the MAC address of the IP phone when the IP
phone mutes a call.
The following table lists the pre-defined variable values.
MAC address of the IP phone
The current IP address of the IP phone
The SIP URI of the current account when the IP phone
places a call, receives an incoming call or establishes
a call.
The user part of the SIP URI for the current account
when the IP phone places a call, receives an incoming
call or establishes a call.
The host part of the SIP URI for the current account
when the IP phone places a call, receives an incoming
To Next Page
Loading...
Need help?
General
Weight and Dimensions
