Yealink SIP-T46G - Page 52

Configuring Basic Features
39
http://<phoneIPAddress>/servl
et?p=features-phonelock&q=lo
ad
Assign a keypad lock key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&model=1&q=loa
d&linepage=1
Phone User Interface
Configure the type of phone
lock.
Assign a keypad lock key.
To configure phone lock via web user interface:
1. Click on Features->Phone Lock.
2. Select the desired type from the pull-down list of Keypad Lock Enable.
3. Select the desired type from the pull-down list of Keypad Lock Type.
4. Enter the unlock password (numeric characters) in the Phone Unlock PIN (0~15
digital) field.
5. Enter the desired time in the Phone Lock Time Out (0~3600s) field.
6. Click Confirm to accept the change.
To configure a keypad lock key via web user interface:
1. Click on DSSKey->Line Key.