Yealink SIP-T46G - Page 130

Configuring Advanced Features
117
 If the Alert-Info header contains a remote URL, the IP phone will try to download the
WAV ring tone file from the URL and then play the remote ring tone. If failing to
download the file, the IP phone will plays the local ring tone associated with info
text. If there is no text matched, the IP phone will play the local ring tone configured
on the IP phone in about ten seconds.
Example:
Alert-Info: http://192.168.0.12:8080/ring.wav/info=family;x-line-id=0
Procedure
Distinctive ring tones can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the distinctive ring
tones feature.
For more information, refer to
Distinctive Ring Tones on page
292.
<y000000000028>.cfg
Configure the internal ringer
text and internal ringer file.
For more information, refer to
Distinctive Ring Tones on page
292.
Local
Web User Interface
Configure the distinctive ring
tones feature.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0
Configure the internal ringer
text and internal ringer file.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-ring&q=load
To configure distinctive ring tones via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.