Yealink SIP-T46G - Call Forward

Administrator’s Guide for SIP-T46G IP Phone
120
Configured tones can be heard on the IP phone for the following conditions:
Condition
Description
Dial
When in the pre-dialing interface
Ring Back
Ring-back tone
Busy
When the callee is busy
Congestion
When the network is congested
Call Waiting
Call waiting tone
Dial Recall
Call hold tone
Record
When recording a call
Info
When receiving a special message
Stutter
When receiving a voice mail
Message
When receiving a text message
Auto Answer
When automatically answering a call
Procedure
Tones can be configured using the configuration files or locally.
Configuration File
<y000000000028>.cfg
Configure the tones for the IP
phone.
For more information, refer to
Tones on page 294.
Local
Web User Interface
Configure the tones for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-tones&q=load
To configure tones via web user interface:
1. Click on Settings->Tones.
2. Select the desired type from the pull-down list of Select Country.