Configuring Advanced Features
125
To configure LDAP via web user interface:
1. Click on Contacts->LDAP.
2. Select Enabled from the pull-down list of Enable LDAP.
3. Enter the values in the corresponding fields.
4. Select the desired values from the corresponding pull-down lists.
5. Click Confirm to accept the change.
To configure an LDAP key via web user interface:
1. Click on DSSKey->Line Key.
2. In the desired DSS key field, select LDAP from the pull-down list of Type.
3. Click Confirm to accept the change.
To Next Page
Loading...
