EasyManuals Logo

Yealink SIP-T46G Administrator's Guide

Yealink SIP-T46G
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #198 background imageLoading...
Page #198 background image
Configuring Audio Features
185
Packetization Time
Ptime (Packetization Time) is measurement of the duration (in milliseconds) of the audio
data in each RTP packet sent to the destination, and hence it defines how much network
bandwidth is used for transfer of the RTP stream. Before establishing a conversation,
codec and ptime are negotiated through SIP signaling. The valid values of ptime range
from 10 to 60, in increments of 10 milliseconds. The default ptime is 20ms. You can also
disable the ptime negotiation.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the codecs to use on
a per-account basis.
Configure the priority and
rtpmap for the enabled codec.
For more information, refer to
Audio Codecs on page 333.
Configure the ptime.
For more information, refer to
Audio Codecs on page 333.
Local
Web User Interface
Configure the codecs and
adjust the priority of the
enabled codecs on a
per-account basis.
Configure the ptime.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-codec&q=load&
acc=0
To configure the codecs and adjust the priority of the enabled codecs on a per-account
basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Codec.
4. Select the desired codec from the Disable Codecs column and click .
The selected codec appears in the Enable Codecs column.
5. Repeat the step 4 to add more codecs to the Enable Codecs column.
6. To remove the codec from the Enable Codecs column, click .

Table of Contents

Other manuals for Yealink SIP-T46G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T46G and is the answer not in the manual?

Yealink SIP-T46G Specifications

General IconGeneral
BacklightYes
Power requirements100-240V, DC 5V
Touchscreen-
Display diagonal4.3 \
Display resolution480 x 272 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts6
Voice codecsG.711, G.722, G.723, G.726, G.729A, G.729B
BluetoothNo
RJ-9 ports quantity2
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width244 mm
Height213 mm

Related product manuals