Administrator’s Guide for SIP-T46G IP Phone
206
5. Click OK to confirm the upgrading.
Note
Upgrade Firmware from the Provisioning Server
IP phones support to use the FTP, TFTP, HTTP, and HTTPS protocols to download the
configuration files and firmware from the provisioning server, and then upgrade the
firmware automatically.
IP phones can download the firmware stored on the provisioning server in one of two
ways:
IP phones check for both configuration files and firmware stored on the
provisioning server during booting up.
IP phones automatically check for configuration files and firmware at a fixed
interval or at specific time.
You can configure the way for IP phones to check for configuration files and firmware.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configure the way for the IP
phone to check for
configuration files.
Specify the access URL of the
firmware.
For more information, refer to
Upgrading the Firmware on
page 343.
Configure the way for the IP
phone to check for
configuration files.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-autop&q=load
To configure the way for the IP phone to check for new configuration files via web user
interface:
1. Click on Settings->Auto-Provision.
Do not unplug the network and power cables when the IP phone is upgrading the
firmware.
Do not close the browser when the IP phone is upgrading the firmware via web user
interface.