Yealink SIP-T46G - Page 246

Appendix
233
Parameter-
network.internet_port.type
Configuration File
<y000000000028>.cfg
Description
Defines the Internet port type.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-DHCP
1-PPPoE
2-Static IP Address
Example
network.internet_port.type = 2
Parameter-
network.internet_port.ip
Configuration File
<y000000000028>.cfg
Description
Configures the IP address when the Internet
port type is configured as Static IP Address.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
IP Address
Default Value
Blank
Range
Not Applicable
Example
network.internet_port.ip = 192.168.1.20
Parameter-
network.internet_port.mask
Configuration File
<y000000000028>.cfg
Description
Configures the subnet mask when the Internet
port type is configured as Static IP Address.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.