Yealink SIP-T46G - Page 255

Administrator’s Guide for SIP-T46G IP Phone
242
Example
phone_setting.active_backlight_level = 1
Parameter-
phone_setting.backlight_time
Configuration File
<y000000000028>.cfg
Description
Configures the backlight time (in seconds)
used to specify the delay time to turn off the
backlight when the IP phone is inactive.
If set to 60 (60s), the LCD backlight is turned off
when the IP phone is inactive for 60 seconds.
Format
Integer
Default Value
30
Range
Valid values are:
0-Always off
1-Always on
15-15s
30-30s
60-60s
120-120s
Example
phone_setting.backlight_time = 0
Parameter-
security.user_password
Configuration File
<y000000000028>.cfg
Description
Sets a new user password for the IP phone.
The IP phone uses ―user‖ as the default user
password.
Note: IP phones support ASCII characters
32-126(0x20-0x7E) only in passwords.
Format
username:new password
Default Value
user
Range
ASCII characters 32-126(0x20-0x7E)
Example
security.user_password = user:password123