Yealink SIP-T46G - Page 257

Administrator’s Guide for SIP-T46G IP Phone
244
Parameter-
phone_setting.phone_lock.unlo
ck_pin
Configuration File
<y000000000028>.cfg
Description
Sets a new unlock password. Once the IP
phone is locked, you can use ―123‖ as the
default password to unlock it.
Note: IP phones support numeric characters
only in password.
Format
Numeric characters only
Default Value
123
Range
0 to 15 characters
Example
phone_setting.phone_lock.unlock_pin =
123456
Parameter-
phone_setting.phone_lock.lock
_time_out
Configuration File
<y000000000028>.cfg
Description
Configures the IP phone to automatically lock
the keypad after a delay time (in seconds).
If set to 0 (0s), the keypad will not be locked
automatically. In this case, you can long press
the pound key to lock the keypad only.
Note: This parameter works only if the IP
phone lock type is preset.
Format
Integer
Default Value
0
Range
0 to 3600
Example
phone_setting.phone_lock.lock_time_out = 8