Yealink SIP-T46G - Page 269

Administrator’s Guide for SIP-T46G IP Phone
256
audible indicator when receiving a new
incoming call during a call.
Note: It works only if the parameter
―call_waiting.enable‖ is set to 1 (Enabled).
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
call_waiting.tone = 1
Parameter-
auto_redial.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to
automatically redial the called number when it
is busy.
If set to 1 (Enabled), the IP phone dials the
previous dialed out number automatically
when the dialed number is busy.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
auto_redial.enable = 1
Parameter-
auto_redial.interval
Configuration File
<y000000000028>.cfg
Description
Sets the interval (in seconds) for the IP phone
to wait between redials.
The IP phone redials the dialed number at
regular intervals till the callee answers the
call.
Format
Integer
Default Value
10
Range
1 to 300