Yealink SIP-T46G - Page 274

Appendix
261
Return Message When DND
Parameter-
features.dnd_refuse_code
Configuration File
<y000000000028>.cfg
Description
Defines return codes and reason of the SIP
response message when rejecting an
incoming call for DND. A specific reason is
displayed on the caller’s phone LCD screen.
If set to 486 (Busy here), the caller’s phone LCD
screen displays the reason ―Busy here‖ when
the callee enables the DND feature.
Format
Integer
Default Value
480
Range
Valid values are:
404-No Found
480-Temporarily not available
486-Busy here
Example
features.dnd_refuse_code = 486
DND Mode
Parameter-
features.dnd_mode
Configuration File
<y000000000028>.cfg
Description
Sets the DND mode for the IP phone.
If set to 0 (Phone), the DND feature is effective
for the IP phone.
If set to 1 (Custom), you can configure the DND
feature for each account.
Format
Integer
Default Value
0
Range
0-Phone
1-Custom
Example
features.dnd_mode = 0