Yealink SIP-T46G - Page 303

Administrator’s Guide for SIP-T46G IP Phone
290
the transfer to screen when pressing the
transfer key during a call.
If set to 1 (Enabled), the IP phone transmits
the specified DTMF digits to the server when
pressing the transfer key during a call, and
then complete the transfer.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
features.dtmf.replace_tran = 1
Parameter-
features.dtmf.transfer
Configuration File
<y000000000028>.cfg
Description
Specifies the DTMF digits to be transmitted to
complete the transfer.
Note: It works only if the parameter
―features.dtmf.replace_tran‖ is set to 1
(Enabled).
Format
String
Default Value
Blank
Range
Valid values are: 0-9, *, # and A-D.
Example
features.dtmf.transfer = 123
Parameter-
features.intercom.allow
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to
automatically answer an incoming intercom
call.
If set to 0 (Disabled), the IP phone rejects
incoming intercom calls and sends a busy
signal to the caller.
If set to 1 (Enabled), the IP phone
automatically answers an incoming intercom
call.