Yealink SIP-T46G - Page 310

Appendix
297
Parameter-
ldap.enable
Configuration File
<y000000000028>.cfg
Description
Enables or disables the LDAP feature on the IP phone.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled
Example
ldap.enable =1
Parameter-
ldap.name_filter
Configuration File
<y000000000028>.cfg
Description
Specifies the name attribute for LDAP searching. The
―*‖ symbol in the filter stands for any character. The
―%‖ symbol in the filter stands for the entering string
used as the prefix of the filter condition.
Format
String
Default Value
Blank
Range
Not Applicable
Example
ldap.name_filter = (|(cn=%)(sn=%))
When the name prefix of the cn or sn of the contact
record matches the search criteria, the record will
be displayed on the phone LCD screen.
Parameter-
ldap.number_filter
Configuration File
<y000000000028>.cfg
Description
Specifies the number attribute for LDAP searching.
The ―*‖ symbol in the filter stands for any character.
The ―%‖ symbol in the filter stands for the entering
string used as the prefix of the filter condition.
Format
String
Default Value
Blank
Range
Not Applicable
Example
ldap.number_filter =