Yealink SIP-T46G - Page 312

Appendix
299
Parameter-
ldap.user
Configuration File
<y000000000028>.cfg
Description
Specifies the user name uses to login the LDAP
server.
This parameter can be left blank in case the server
allows anonymous to login. Otherwise you will need
to provide the username to access the LDAP server.
Format
String
Default Value
Blank
Range
Not Applicable
Example
ldap.user = cn=manager,dc=yealink,dc=cn
Parameter-
ldap.password
Configuration File
<y000000000028>.cfg
Description
Specifies the password to login the LDAP server.
This parameter can be left blank in case the server
allows anonymous to login. Otherwise you will need
to provide the password to access the LDAP server.
Format
String
Default Value
Blank
Range
Not Applicable
Example
ldap.password = secret
Parameter-
ldap.max_hits
Configuration File
<y000000000028>.cfg
Description
Specifies the maximum number of search results to
be returned by the LDAP server. If the value of the
―Max.Hits‖ is blank, the LDAP server will return all
searched results. Please note that a very large value
of the ―Max. Hits‖ will slow down the LDAP search
speed, therefore it should be configured according to
the available bandwidth.
Format
Integer
Default Value
50
Range
1 to 32000