Yealink SIP-T46G - Page 325

Administrator’s Guide for SIP-T46G IP Phone
312
Example
account.1.naptr_build = 3
Parameter-
account.x.fallback.redundancy_ty
pe
Configuration File
<MAC>.cfg
Description
Configures the registration mode for the IP
phone in fallback mode.
X ranges from 1 to 6.
Format
Integer
Default Value
0
Range
Valid values are:
0-Concurrent registration
1-Successive registration
Example
account.1.fallback.redundancy_type = 1
Parameter-
account.x.fallback.timeout
Configuration File
<MAC>.cfg
Description
Configures the time interval (in seconds)
for the IP phone to detect whether the
working server is available by sending the
registration request after the fallback
server takes over the call control.
It is only applicable to successive
registration mode.
X ranges from 1 to 6.
Format
Integer
Default Value
120
Range
10 to 2147483647
Example
account.1.fallback.timeout = 160
Parameter-
account.x.transport
Configuration File
<MAC>.cfg
Description
Configures the transport type for account X.
If the parameter is set to 3 (DNS-NAPTR)
and no server port is given, the IP phone
performs the DNS NAPTR and SRV queries