Yealink SIP-T46G - Page 353

Administrator’s Guide for SIP-T46G IP Phone
340
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
0-Disabled
1-Enabled
Example
security.trust_certificates = 1
Parameter-
security.ca_cert
Configuration File
<y000000000028>.cfg
Description
Specifies the type of certificates the IP
phone used to authenticate the connecting
server.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
0
Range
0-Default certificates
1-Custom certificates
2-All certificates
Example
security.ca_cert = 1
Parameter-
security.cn_validation
Configuration File
<y000000000028>.cfg
Description
Enables or disables the IP phone to
mandatorily validate the CommonName or
subjectAltName of the certificate sent by
the connecting server.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
0
Range
0-Disabled
1-Enabled